2000W-2800W can choose Industrial Electric Hot Air Gun Digital Display Car Film Heat gun Air Dryer for Soldering Thermal Blower Soldering station Shrink wrapping Tools
CAUTION: This is a high accurarcy heat gun. when you adjust to 0 gear to close the heat gun. the heat gun's air motor will still work for 10 second to outgoing high temperature gas. this is not the quality problem.We make a long laboratory test and prove that use the 10 seconds protection can protect the LCD display and PCB board. the result is make the lifetime up to 20000 hours.(This function is only available for F4-2800W and 858A+ 2000W, other models do not have this function)
Technical parameter:
Power Voltage: 220V
Power watt:
F1 2000W
F2 2000W
F3 2500W
F4 2800W
Plug type:EU
Air flow approx for step 1:350L/min
Air flow approx for step 2:600L/min
Weight:0.85kg
Minimum Temperature:60 Degree Centigrade
Maximun Temperature:600 Degree Centigrade
Application:
Remove pain/Peel old vallpaper/Remove plastic floor tile/Bend pvc pipe/Melt litter in pipe/Remove greasy litter/For Shrink Wrap
Note:
(F4 2800W ) Don't pull out the plug until the motor has completely stopped running 10 seconds later.
Pistola termica da 2000 W temperatura LCD regolabile mini soffiatore termoretraibile con costruzione a quattro ugelli di asciugatura
With the function of delayed shutdown, the hot air gun continues to blow cold air to cool the heating core, protect the heating core and prolong the service life
Insulated heating core imported from Germany
Mabuchi-Motor imported from Japan
Product features:
1. The double heating wire rises rapidly
2. Mica heat insulation of gun barrel is safe and reliable
3. ABS nylon engineering handle is comfortable to hold
4. Two gear wind speed regulation is suitable for many scenarios
matters needing attention:
① When using the hot-air gun, try to use it in a dry place.
② When the hot-air gun is used or just after use, do not touch the nozzle to avoid scalding.
③ The handle of the hot air gun must be kept dry, clean and away from oil or gas.
④ After the hot-air gun is used, the air outlet is upward and can be stored only after the air gun is cooled.
⑤ Do not block or cover the air inlet and outlet of the hot-air gun.
Safety warning:
1. Don't use it as a hair dryer for blowing my hair.
2. Do not point the hot air gun directly at people or animals
3. Do not use near inflammables and flammable gases
Product parameters:
Working voltage: 220-240V / 50Hz
Power consumption: 2000W
Temperature range: 60-650 ℃
Temperature regulation mode: Key temperature regulation
Air volume: 110V( I 180-300 L / min II 250-350L/min)
220V( I 250-350L/min II 350-500L/min)
Switch: second gear wind speed adjustable
Shell material: PP + 15% glass fiber
Rear cover shell material: ABS
Motor: Japan 365 Mabuchi-Motor
Heating cylinder: Luo iron plated material
Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework
Power cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding
2-1.0m3 into the machine part, with an outer diameter of 6.8mm
Hot Air Gun,Hair dryer,Heat Gun,Dryer for Soldering,Thermal Blower,Shrink Wrapping,Plastic Welder,Tools,Heat gun,Thermal blower,heat shrink hair dryer,hot air gun with adjustable temperature,heat shrink gun,industrial dryer 220v,industrial 110v hot air gun,construction hair dryer,Technical hair dryer,construction dryers.